IDE SETTING: Make the Data Transfer Faster

You would want the hard drive data transfer as quickly as possible. To get it, you need to do a little touch on your hard drive. Sometimes, we're lucky if the vendor has placed the jumper settings on the hard drive fan optimally. It's good but you also see and check it out yourself.

First we check the jumper settings on the hard drive. The location is in the back right next to the slot for the connector and power cable. Jumper setting instructions at the top of the disk. To see it, first off the hard drive of the computer or see the instructions on your manufacturer website.


Label format is almost the same in every hard drive on the market, namely in the form of a table that is very easy to read. Be sure to enter the BIOS settings menu after a set position and resetting jumpers disk correctly. Check whether the disk is detected by the BIOS. If you have then this step was successfully completed.

Setting a standard disk pair of the most frequently accessed on a single connector. While one other connector, is used for CD-RW and other hard drives rarely used. Please note, the transfer speeds on two hard drives in a particular channel different from the two hard drives on two channels.

So how to accelerate the transfer speed hard disk. However, the author is not responsible if anything happens to the unwanted. Use at your own risk.