These tips are not speed up the computer, but only to optimize your hard drive capacity. Because many Windows default settings that I think too much. For example there is the recycle bin which defaults to reach 10% of the disk. What a great capacity for a trash can. Indeed, if there are files in the recycle bin still be in the restore again, but if you just want to put the files in the recycle bin without thinking about your disk space dwindling so it's up to you.
The way to change the capacity of the recycle bin is very easy. You simply right click on the Recycle Bin icon and choose Properties, and set how many percent of the recycle bin you want to use.
The following steps that allow you to utilize the maximum capacity of your hard disk is to utilize the capacity of the cache in Internet Explorer browser. How to open Internet Explorer and click tools then options. Open the General tab and click the settings button in the Temporary Internet Files. Then change the settings with the arrow menngeser there.
Do not forget to always clean your recycle bin periodically.
Sunday, January 10, 2010
Saturday, January 9, 2010
IDE SETTING: Make the Data Transfer Faster
You would want the hard drive data transfer as quickly as possible. To get it, you need to do a little touch on your hard drive. Sometimes, we're lucky if the vendor has placed the jumper settings on the hard drive fan optimally. It's good but you also see and check it out yourself.
First we check the jumper settings on the hard drive. The location is in the back right next to the slot for the connector and power cable. Jumper setting instructions at the top of the disk. To see it, first off the hard drive of the computer or see the instructions on your manufacturer website.
Label format is almost the same in every hard drive on the market, namely in the form of a table that is very easy to read. Be sure to enter the BIOS settings menu after a set position and resetting jumpers disk correctly. Check whether the disk is detected by the BIOS. If you have then this step was successfully completed.
Setting a standard disk pair of the most frequently accessed on a single connector. While one other connector, is used for CD-RW and other hard drives rarely used. Please note, the transfer speeds on two hard drives in a particular channel different from the two hard drives on two channels.
So how to accelerate the transfer speed hard disk. However, the author is not responsible if anything happens to the unwanted. Use at your own risk.
First we check the jumper settings on the hard drive. The location is in the back right next to the slot for the connector and power cable. Jumper setting instructions at the top of the disk. To see it, first off the hard drive of the computer or see the instructions on your manufacturer website.
Label format is almost the same in every hard drive on the market, namely in the form of a table that is very easy to read. Be sure to enter the BIOS settings menu after a set position and resetting jumpers disk correctly. Check whether the disk is detected by the BIOS. If you have then this step was successfully completed.
Setting a standard disk pair of the most frequently accessed on a single connector. While one other connector, is used for CD-RW and other hard drives rarely used. Please note, the transfer speeds on two hard drives in a particular channel different from the two hard drives on two channels.
So how to accelerate the transfer speed hard disk. However, the author is not responsible if anything happens to the unwanted. Use at your own risk.
Subscribe to:
Posts (Atom)